AKW - Contour - P12 Pump Link Kit, Option A with UPSW3 - 3 - 22 Trap
- Easy to install - Provides quick installation with limited complications
- Suitable for use with wide range of electric and/or mixer showers including AKW, Mira, Triton and other brands - Compatibility with electric and mixer showers enables greater flexibility based on the individual needs of the user
- Non-handed unit - Pump head can be rotated to allow flow in either direction
- Virtually silent in operation - Ensures a noise free showering experience
- For use with a level access or above ground shower tray
- UPSW-3 is only 30mm in depth & has a 22mm outlet
- Chrome top flange
- Easy to clean
- If using and Eagle Two or Prinia use KIT D
Regular Price
£982.80
Special Price
£517.93
£431.61
SKU
05PP01A-L
Link Kit A: P12 Pump + Shower waste gully
Shower Waste Pump is the quiet, unblockable, maintenance FREE and variable speed shower waste pump for when gravity drainage is unavailable.
FEATURES
- Peristaltic pump design.
- Safe 24v DC low energy motor.
- NEW wall plate with quick release pump bracket.
- Complete with 2 metre length of 22mm flexible pipe for improved performance.
- Self priming up to 500mm.
- Pumps up to 12 litres per minute.
- NEW variable speed transformer.
- Not handed.
BENEFITS
- Pumped water travels through a sealed tube reducing the risk of blockage.
- Near silent operation.
- MAINTENANCE FREE design comes with a 5 YEAR WARRANTY.
- Low running costs due to the 24v DC efficient low energy motor.
- NEW wall plate with quick release pump bracket minimises installation time.
- Can be retrofitted and is compatible with all manufacturers 22mm wastes.
- Not handed for easy and quick installation.
- Match speed of pump to flow of water.
- Suitable for electric and mixer showers. *(Additional flow switch required for mixer shower installations).
- Link directly to a Redring Selectronic Premier WP link enabled shower eliminating the need for a flow switch, see ‘Link’ options.
Pump housing dimensions: A = 190mm, B = 210mm, C = 330mm
Pump only dimensions: A = 180mm, B = 205mm, C = 270mm
KITS:
- PUMP ONLY - For top access shower trays
- KIT A - For shower trays (If using an Eagle TWO or Prinia use Kit D)
- KIT B - For floor formers
- KIT D - For shower trays with 90mm diameter waste
To achieve optimum pump performance of 12 litres per minute we recommend the pump be installed no higher than 350mm from the top of the shower waste outlet to the underside of the wall plate.
The pump can be installed upto a maximum height of 500mm to the underside of the wall plate, but this will reduce the pumps overall performance.
| Manufacturer | Contour |
|---|---|
| Is Featured | No |
We found other products you might like!
