Pressalit - PLUS - Support Arm, Fixed Height (Foldable, Counter-Balanced, Projection: 700 or 850mm)
Please Note:
Not all Pressalit products are stocked in the UK and incur an additional shipping and customs charges fee of up to a maximum of £65 from Denmark.
- Integrated counter-balance
- Foldable
- Warm slip resistant surface
- Ergonomic grip for weak hands
- Projection: 700mm or 850mm
- Choice of colour
PRESSALIT - PLUS - Support Arm, Fixed Height (700 / 850mm)
700mm (R360070)
850mm (R360085)
All PLUS support arms come with an integrated counter-balance, which ensures a controlled movement between horizontal and vertical positions.
- 850mm Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
- 700mm Suitable for use with toilet pans projecting 540/560mm
PLUS support arm, counter-balanced, 700 or 850mm, ergonomically shaped to provide a clear sense of where the support arm ends, for fixed mounting, foldable.
Materials:
- The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
- Incl. fixing kit for brick wall.
Mounting:
- See Technical DATA SHEET for information on fixing suitable for various wall types
- TECHNICAL DATA SHEET (700mm)
- TECHNICAL DATA SHEET (850mm)
Ergonomy
- The oval shape gives an easy and comfortable surface to lean and push against.
- The end of the support arm is enlarged so that it is easier to pull forward from sitting position and also provides a clear sense of where the support arm ends.
- Soft and slip-resistant material that has a warm feel.
Features
- Folds against the wall
- The underside is shaped for the mounting of various accessories.
Capacity
- Max load: 150kg
- When the support varm is loaded with 150kg, each wall fastener is loaded with 161kg
- Plus support arms have been tested statically with 700kg (close to the wall, 425kg (in the middle and 225kg (the outermost point)
Adjustability: Fixed mounting
Maximum user weight / load: 150kg
Weight: 2.778kg
Carton size: 795 x 200 x 240mm
Gross weight: 3.728kg
CLEANING
- The product is to be cleaned with hot water or a mild soapy cleaning agent
- Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISENFECTANTS
- Clinimax Difficil - S
- Erisan OXY+
NON-DISINFECTANTS
- Suma Star free D1
- TASKI 100
- TASKI 200
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate
DECALCIFICATIONS OF ALUMINIUM PARTS
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
DECLARATION OF CONFORMITY
This product complies with the requirements of Council Directive 93/42/EEC concerning medical devices, as last amended by Council Directive 2007/47/EC of 5 September 2007.
INTENDED USE
- The support arm is used as a support for sitting down or getting up from a toilet, or for sideways transfer from a wheelchair.
- For indoor use in a wet environment, such as a bathroom or a washroom, in private homes, nursing homes and hospitals.
- For institutional use, the expected life time is 10 years.
- Life cycle test performed according to ISO 17966:2016.
- For maintenance, please refer to user guide
Manufacturer | Pressalit Care |
---|---|
Is Featured | No |