Pressalit - PLUS - Wash Basin Bracket with Lever Control (Manually Height Adj. with Gas Cylinder)

Pressalit - PLUS - Wash Basin Bracket with Lever Control (Manually Height Adj. with Gas Cylinder)

Lever Controlled Unit (R4750)

Pressalit - PLUS - Wash Basin Bracket, Lifter Electrically Height Adjustable (668 - 968mm)

Pressalit - PLUS - Wash Basin Bracket with Lever Control, Manually Height Adj. & Sideways Adj. with Gas Cylinder (R4680)

Pressalit - PLUS - Wash Basin Bracket with LEVER Control, Manually Height & Sideways Adj. with GAS Cylinder (R4680)

Pressalit - PLUS - Wash Basin Bracket with Lever Control (Manually Height Adj. with Gas Cylinder)

Please note:

Not all Pressalit products are stocked in the UK and may incur an additional shipping fee of up to a maximum of £65 to cover the shipping costs from Denmark.

Call us on 01626 324 234


 

  • Can be height adjusted (300mm, from 668 to 968mm)
  • For MATRIX CURVE and MATRIX SMALL Wash Basins
  • Standing or seated heights available
  • Adapts to progressive needs of individuals
  • Three different methods of adjsutment depending on situation

Regular Price £1,890.38 Special Price £1,606.82 £1,339.02
SKU
R4650

PRESSALIT - PLUS - WASH BASIN BRACKET

LEVER CONTROL, MANUALLY HEIGHT ADJUSTABLE WITH  GAS CYLINDER

  • The lever control can also be used as a towel rail and can be placed either side of the wash basin
  • Manually height adjustable by 300mm (stepless)
  • Recomendation: Flexible feed and waste system R2067/R2065 (UK: R2077/2075)
  • Materials: Aluminium and ABS polymer
  • Incl. Fixing bolts for wash basin
  • Excl. Fixing kit for wall

MATERIALS

  • The wash basin bracket is primarily made of 10-micrometre anodized aluminium.
  • The ends of the bracket cover are capped with ABS polymer. The bracket is available with a lever control consisting of an ABS polymer switch at the end of an anodized aluminium arm

ERGONOMY

  • The height of the wash basin is easily adjusted by means of the lever control.
  • The wash basin bracket suits all types of bolt-mounted wash basin. Its rounded, sleek design greatly facilitates cleaning.

FEATURES

  • The arm that holds the lever control can function as a towel rail.
  • The lever control can be placed on the right- or left-hand side of the wash basin.
  • This wash basin bracket is supplied as standard with a gas cylinder for wash basins weighing 16-22 kg, however, it is possible to order it for wash basins weighing 8-12 kg or 12-16 kg.
  • Maximum load: 135 kg.
  • Suitable for wash basins that weight 16-22 kg.
  • When the wash basin is loaded with 135 kg, each wall fastener will be carrying 57 kg.
  • Wash basin brackets need to be able to carry the weight of the wash basin, as well as support the weight of the person who is leaning against the wash basin or who is using the wash basin to rise from seated position.
  • Neither wash basin nor wash basin brackets are intended to carry a person, and the test methods applicable to wash basin brackets reflect this: ISO 17966 prescribes a static test on the front edge of the wash basin at 75% of maximum user weight, i.e. when the maximum load on a wash basin bracket is given as 135 kg and the wash basin weighs 20 kg, it is – according to ISO 17966 – the equivalent of a user weighing 153 kg leaning on the front edge of the wash basin.

CLEANING

  • PLUS & SELECT wash basin brackets.
    The product is to be cleaned with hot water or a mild soapy cleaning agent.
    Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

    The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

    DISINFECTANTS:
    Clinimax Difficil-S
    Erisan OXY+

    NON-DISINFECTANTS:
    Suma Star free D1
    Taski 100
    Taski 200

    The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

    DECALCIFICATION OF ALUMINUM PARTS:
    Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

DECLARATION OF CONFORMITY

  • This product complies with the requirements of Council Directive 93/42/EEC concerning medical devices, as last amended by Council Directive 2007/47/EC of 5 September 2007. It also complies with all relevant requirements in the Council Directive 2006/42/EC (of 17 May 2006) on machinery.

WARRANTY

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.

More Information
Manufacturer Pressalit Care
Is Featured No