Pressalit - SELECT - Wash Basin Lifter, (Wall-Mounted, Floor Support, Electrically 300mm Height-Adj, Options)
Please note:
Not all Pressalit products are stocked in the UK and may incur an additional shipping fee of up to a maximum of £65 to cover the shipping costs from Denmark.
- Conceled Plumbing, Lever or Remote control, with or without Safety Function
- Can be height adjusted 300 mm from 670 to 970 mm. For MATRIX CURVE and MATRIX SMALL wash basins
DOWNLOADS
PRODUCT INFORMATION
- Recommended with MATRIX CURVE/CURVE II* and MATRIX SMALL** washbasins
- Recommendation flexible feed/waste system (UK market R2075)
- Including fixing bolts for wash basin
- Excluding fixing kit
- *Installation cover R2057, R2056 is recommended
MATERIALS
-
The wash basin lifter is mainly constructed of anodised aluminium. The front plate and the bottom plate are made of polystyrene (PS).
ERGONOMY
- The lifter‘s stringent and pure design as well as smooth surfaces are easy to clean and attractive to look at.
- They also help ensure good hygiene in the bathroom.
- The exclusive aluminium side profi les are light, durable and elegant to look at.
FEATURES
- The wash basin is raised or lowered using the wired hand control or the lever control at the end of the wash basin.
- The lever control can be positioned on either side of the wash basin and also serves as a towel holder.
- The lever control is strong enough to be used as an extra support.
- The wash basin can be adjusted 300 mm – from 670 to 970 mm above the floor.
Product capacity
Maximum load: 150 kg.
Suitable for wash basins that weigh 16-22 kg.
When the wash basin is loaded with 150 kg, each wall fastener will be carrying 18 kg.
Wash basin brackets need to be able to carry the weight of the wash basin, as well as support the weight of the person who is leaning against the wash basin or who is using the wash basin to rise from seated position.
Neither wash basin nor wash basin brackets are intended to carry a person, and the test methods applicable to wash basin brackets reflect this: ISO 17966 prescribes a static test on the front edge of the wash basin at 75% of maximum user weight, i.e. when the maximum load on a wash basin bracket is given as 150 kg and the wash basin weighs 20 kg, it is – according to ISO 17966 – the equivalent of a user weighing 173 kg leaning on the front edge of the wash basin.
PLUS & SELECT wash basin brackets.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
| Manufacturer | Pressalit Care |
|---|---|
| Is Featured | No |