SELECT Toilet Lifter

Electrically Height Adjustable with Wired Hand Control, For Wall Outlet

• SELECT toilet lifter, 400 mm electrically height adjustable with wired hand control.
• Incl. cistern with dual flushing system preset at 3/6 litres.
• Toilet pan and toilet seat to be ordered separately.
• For wall or floor outlet.
• Excl. fixing kit
• Materials: Anodised aluminium and polystyrene (PS).
• See TECHNICAL DATA SHEET - For information on fixings suitable for various wall types.

• FIXATION GUIDE
• MOUNTING INSTRUCTIONS (R8222) WALL OUTLET
• MOUNTING INSTRUCTIONS (R8212) FLOOR OUTLET
• TECHNICAL DATA SHEET (R8222) WALL OUTLET
• TECHNICAL DATA SHEET (R8212) FLOOR OUTLET
• TECHNICAL DARA SHEET (R8312) FLOOR OUTLET

ERGONOMY

FEATURES

The toilet lifter is available with a wired hand control which makes it easy for the user or helper to adjust the height. Seat height can be adjusted a full 400 mm from 425 to 825 mm – even while the user is sitting on the toilet

CAPACITY

Maximum user mass: 200 kg.
Maximum load: 235 kg. (user mass + accessories).
When the toilet lifter is loaded with 235 kg, each wall fastener is loaded with 94 kg.
The toilet lifter has been tested statically with 600 kg, which is a requirement according to the applied assistive products standards. Please note that most toilet pans compatible with this lifter have been tested up to 4

ADJUSTABILITY

• Height Adjustable

ADJUSTMENT HEIGHT

• 400mm

MAINS CONNECTION

• 230V
• 50-60Hz

IP RATING

• IPX6

POWER CONSUMPTION (MAX LOAD)

• 70W

POWER CONSUMPTION (STAND-BY)

• 2W

SPEED UPWARDS

• 12 mm/s

SPEED DOWNWARDS

• 12 mm/s

NOISE LEVEL

• 48 dB

ACTUATOR (MOTOR)

•  LA31 Careline, (Linak), 4000N, IPX6

CONTROL BOX

• CB9 Careline, (Linak), IPX6

WIRED REMOTE CONTROL

• HB3 (Linak), IP66

MAX USER WEIGHT

• 200Kg

MAX LOAD

• 235Kg

WEIGHT

• 60Kg

CLEANING

SELECT toilet lifter.

• The product is to be cleaned with hot water or a mild soapy cleaning agent.
• Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:

• Clinimax Difficil-S
• Erisan OXY+

NON-DISINFECTANTS:

• Suma Star free D1
• Taski 100
• Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:

Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

DECLARATION OF CONFORMITY

This product complies with the requirements of Council Directive 93/42/EEC concerning medical devices, as last amended by Council Directive 2007/47/EC of 5 September 2007. It also complies with all relevant requirements in the Council Directive 2006/42/EC (of 17 May 2006) on machinery and the Council Directive 2011/65/EC on RoHS.

WARRANTY