PRESSALIT - DANIA - Seat & Cover

With stabilising buffers and extra stron cross-bar hinge (D92)

• MOUNTING INSTRUCTIONS

• TECHNICAL DATA SHEET

MATERIALS

• Seat & cover: Thermoset plastic (urea)

• Strap: Stainless steel V2A

ERGONOMY

• An ergonomically designed seat that is well suited to most people.
• Sideways transfer is easy because the seat is rather flat.
• The cover is comfortable to sit on, and when set upright it gives good support to the back.

This product has been tested statically up to 375 kg. As the European standard for technical aids for disabled, BS/EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 250 kg.

Hinge model: D92

CLEANING

• Use a mild soap solution to clean the toilet seat.
• Please take care that the seat and hinges are not left damp. For disinfecting the seat, e.g. ethanol 85% can be used.
• Make sure that the product is wiped down with a soft rag wrung out in clear water and dried off with a soft, dry cloth immediately after disinfection.
• Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust.
• Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.

WARRANTY

• Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.