- Wet Room
- Changing Places
Carbon heating film - The perfect solution for heating wood or laminate floors.
Our carbon heating film is ideally suited for installation beneath wood or laminate floors. At less than half a millimeter thick , it has a negligible effect on floor height. The film is laid over our exceptional 6mm Depron floor insulation (which replaces the standard flooring underlay) to give a minimal effect on your floor height - less than 6.5mm! This makes it ideal for use in both new buildings and renovations or refurbishments where floor height can be vitally important!
Heat Output - The film is designed as a heating system (not just floor warming) and gives an even heat coverage beneath the whole floor. It is available in two power outputs 130w per sqm for ordinary home heating and 160w per sqm for conservatories where higher heat losses are experienced.
Simple to install - The installation is so simple it can be done by anyone with even the most basic DIY skills, leaving your electrician to connect it up to the mains for you. Please follow the link for further step-by-step installation instructions.
Digital control - The control of the heating system is via our simple to operate, FH-01 thermostat controller which has a 7-day/24 hr timer built in. The thermostat is unobtrusive and takes up the same space as a standard light switch. Quality - The heating film is manufactured in the UK in a BEAB approved factory and has been used worldwide for many years. It is extremely reliable and comes with a lifetime manufacturers warranty!
|Roca Quick Search||No|
|Tray / Former Size||No|