View Full-Size Image

£455.00

Bio-Bidet BB-1000 Electronic Bidet Toilet Seat

Bio Bidet offers an efficient and sophisticated alternative to purpose built shower toilets at a fraction of the price and is the only electronic bidet seat with WRAS (Water Regulations Advisory Scheme) approval for installation in the UK.

Bio Bidet can be fitted to most standard toilet pans in place of the original toilet seat. If washing the hands is a basic part of bathroom hygiene, then intimate washing is quite simply a logical addition to the daily hygiene routine.  

Cleansing with water is more comfortable, more effective and above all more hygienic than tissues. A toilet seat, bidet and dryer all in one and by definition a brilliant space saver.

Bio Bidet can replace most conventional toilet seats (see dimensions and fit chart) thus converting a standard toilet into a sophisticated shower-toilet or washlet which enables the users to wash and blow-dry themselves while remaining seated after finishing on the toilet. 

 

Bio Bidet is innovative in providing a hygienic and thorough personal cleansing procedure while eliminating the need for toilet paper. Touch buttons on a control panel enable users to activate and adjust the variable settings to suit their personal preferences for temperature and pressure-controlled washing and blow-drying operations.

A spray nozzle extends out of the bidet toilet seat to the required position to provide a gentle stream of aerated warm water. 

At the end of the wash cycle, the nozzle retracts back into the bidet toilet seat to allow for the warm air-drying cycle to be activated. The nozzle self-cleans automatically before and after each use.

The seat and the lid are made from germ-resistant polymers (Polygiene Plastic). All main electronic components are treated with thick epoxy for maximum protection against moisture, rust and residues that can cause short circuit.

The BB-1000 can be installed on two-piece toilets with round bowls. The tank and the bowl on 2 piece toilets are separate and are connected to each other upon installation.

The Bio Bidet fits best on a standard round toilet pan with a flat top surface measuring at least 500mm from the extreme front edge to the rear of the pan ... or to the front surface of the cistern, on a close-coupled toilet.

The distance from the centre line of the seat fixing holes to the front edge of the toilet bowl should be 419mm +/- 20mm. The spacing between the centres of the seat fixing holes on the pan should be between 140mm and 195mm.

If you have any doubt about the suitability of the Bio Bidet for your toilet, please contact us for advice. The static weight limit for the Bio Bidet seat is 21 stone (133kg).